Connector Assignments
6.4 Conductor Connection/Conductor Cross Sections
The following table contains an extract of the technical data of the line connectors.
Interface
Power Supply
Voltage
24 V
CAN-Connector
Connector type plug component
(Range of articles)
FKCT 2,5/..-ST KMGY
FK-MCP 1,5/5-
STF-3,81
Connection method
spring-cage
connection
spring-cage
connection
Stripping length
10 mm
9 mm
Conductor cross section solid min.
0,2 mm²
0.14 mm²
Conductor cross section solid max.
2,5 mm²
1.5 mm²
Conductor cross section stranded min.
0,2 mm²
0,14 mm²
Conductor cross section stranded max.
2,5 mm²
1,5 mm²
Conductor cross section stranded, with ferrule
without plastic sleeve min.
0,25 mm²
0,25 mm²
Conductor cross section stranded, with ferrule
without plastic sleeve max.
2,5 mm²
1,5 mm²
Conductor cross section stranded, with ferrule with
plastic sleeve min.
0,25 mm²
0,25 mm²
Conductor cross section stranded, with ferrule with
plastic sleeve max.
2, 5 mm²
0,5 mm²
Conductor cross section AWG/kcmil min.
24
26
Conductor cross section AWG/kcmil max
12
16
2 conductors, solid
not allowed
not allowed
2 conductors, stranded
not allowed
not allowed
2 conductors, stranded, ferrules without plastic
sleeve
not allowed
not allowed
2 conductors with same cross section, stranded,
TWIN ferrules with plastic sleeve, min.
0,5 mm²
not allowed
2 conductors with same cross section, stranded,
TWIN ferrules with plastic sleeve, max.
1,5 mm²
not allowed
Minimum AWG according to UL/cUL
26
28
Maximum AWG according to UL/cUL
12
16
Page 18 of 34
Hardware Manual • Doc. No.: C.2907.21 / Rev. 1.1
CAN-DP/2, CANopen-DP/2
