ESD C.2047.01, Руководство по оборудованию, Страница: 17 / 29

Technical Data
5.4 IRIG-B Input
Input / decoder analog
- isolating transformer
- 12 bit A/D converter
- connector: X400 (DSUB25 male)
Input digital
- RS-422 compatible
- connector: X400 (DSUB25 male), electrical isolation
- RS-422 compatible
- connector: Pn4
Coding
Physical layer IRIG-Coding
analog X400 B12x (x = 0...7)
+ selectable
IEEE1344-1995
format
digital
X400
B00x (x = 0...7)
Pn4
For further information read the IRIG-B standard. The document can
be downloaded from the IRIGB web site:
http://www.irigb.com/ .
Controller 8051
INFORMATION
At the standard module types without conduction cooling the IRIG-B RS-422 compatible
input is available at Pn4 as well. Please take attention that the interface is connected
alternatively to connector X400 OR Pn4, not simultaneously!
INFORMATION
The IRIG-B option is not equipped on the PMC-CAN/400-4, order No.: C.2047.03.
5.5 Software
CAN layer 2 (CAN-API) software drivers are available for Windows ® , Linux ® *, VxWorks ® *, QNX ® *,
RTX*, RTX64* and OnTime-RTOS-32* supporting up to 24 CAN nets. Drivers for other operating
systems are available on request.
The CANopen software package is available for Windows, Linux*, QNX*, RTX* and VxWorks* .
J1939 Stack is available as higher layer protocol for Windows, Linux and RTX.
ARINC 825 as another higher layer protocol is available as an option.
* For a detailed information about the driver availability for your special operating system please contact our sales team.
PMC-CAN/400-4 Hardware Manual • Doc. No.: C.2047.21 / Rev. 1.3 Page 17 of 29