
Overview
1.2 PCB View with Connectors
Figure 2:
PCB view of CAN-PCIe/200-2 with 2 CAN interfaces
On CAN-PCIe/200-1 (C.2042.02) the interface CAN Net 1 is not equipped.
See also page 15 for signal assignment of the CAN connectors.
NOTICE
Read chapter “Hardware Installation” on page 10, before you start with the installation of
the hardware!
CAN-PCIe/200
Hardware Manual • Doc. No.: C.2042.21 / Rev. 1.5
Page 9 of 28