9 |
P a g e
ANTI-FALSING CIRCUITRY
RedLine 360c is designed to provide you the truest alerts and minimize the distraction of
erroneous signals from fixed-position and moving sources.
• Adjustable Sensitivity:
allows driver to adjust sensitivity to driving environment,
reducing false alarms from fixed position sources such as automatic door openers.
Auto modes automatically adjusts sensitivity based on vehicle speed.
• IVT Filter: system automatically reduces false alerts from moving In
-Vehicle
Technology sources such as collision avoidance systems and adaptive cruise control.
PREFERENCES
OVERVIEW
To access the Preferences menu, press and hold both the SEN and BRT buttons. “Preferences”
will be displayed.
SEN
is used to change and review the preference category.
+
and
-
are used to change the settings within a category.
BRT
is used to change and review a sub-category and to confirm selections.
To exit Preferences, press the power button or simply wait a few seconds without pressing any
buttons
. A “Completed” message will display, confirming your selection(s).
User Mode
Advanced
–
access and customize all settings and preferences.
Novice
- access and customize only Units (English or metric) and Display Color. All other
preferences are set to factory defaults. To view all settings and preferences, you must
switch to Advanced mode.
Pilot Mode
Scanning Bar
- shows an animated scanning bar along with the selected sensitivity
mode.
Full Word
- only displays the selected sensitivity mode.
Arrow Mode
Single
- arrows are displayed indicating the direction of only the primary threat. All
arrows use your selected display color.
Multiple
- threat-direction arrows are displayed for multiple threats. When multiple
threats are displayed, the direction arrow of the primary threat will blink.
Band
- threat-direction arrows are color-coded for the band that is being detected.
When multiple threats are displayed, the direction arrow of the primary threat will
blink. X band =
green
, K band =
blue
, Ka band and Laser =
red
Note: When using Band arrow mode with Standard FR2 and Spec FR2 meter modes, the
rear bar graph will use the selected display color.
