Always wear a properly
fitted helmet that
complies with CPSC or CE
safety standards when you
ride your scooter.
Correct Fitting:
Make sure your
helmet covers your
forehead.
AXLE
Quick Start Guide
What’s In The Box?
Hover-1 Axle • Wall Charger • Operation Manual/Quick Start Guide
Riding Your Axle
Charging Your Axle
Calibration
Stay relaxed and step on quickly, confidently and evenly. Imagine climbing
stairs, one foot, then the other. Look up once your feet are even. The Axle
may vibrate or spin in one direction, if weight and pressure are applied to
only one foot mat. THIS IS NORMAL.
Stop
Move
Forward
Move
Back
FULLY
CHARGED
NOT FULLY
CHARGED
Turn Off Your
Hover-1 Axle
Plug the charger into
the charge port
(Located In The Back)
1. Place the Axle on a flat surface.
2. Press and hold the ON/OFF button for
a total of 15 seconds.
3. The Axle will turn on, lighting the
battery indicator on the board.
4. After the light flashes 5 times, release
the ON/OFF button
5. Turn the board off and then back on.
The calibration will now be complete.
