ES330-PEG IP Phone
Escene Communication
22
7.Web Settings
In addition to the phone user interface, you can also customize your phone via web user interface. In order to access the web user
interface, you need to know the IP address of your new phone. To obtain the IP address, press the C key on the phone. Enter the IP
address (e.g. HTTP://192.168.0.10 or 192.168.0.10) in the address bar of web browser on your PC. The default username is root
(case-sensitive) and the password is root (case-sensitive).
NOTE: Here use the example with 320.All of the other ES330-PEG IP PHONE was looks like as below.
Main Interface-Phone Status
Here you can see as below information: System Run Time, Register Status, Network Status, System Information,
ITEM
DESCRIPTION
System Run Time
The phone system normal running time.
Register Status
The status with Account 1~3. EX Module status.
Network Status
The status with LAN, MAC, LAN IP, Net mask, Gateway, Primary DNS, Secondary
DNS, VPN IP, PC IP, PC Net mask, Device Type, DHCP Server.
System Information
The status with Phone Model, Software Version, Hardware Version, Hardware ID,
Kernel Version, Auto-Provision Server URL, TFTP Server IP.
7.1 Net Work
7.1.1 LAN Port
NOTE: For the WIFI model, it didn't have the LAN port, but it can set the LAN information.
