www.escene.cn/en/
Escene Communication
13
Handset
-or press
End
Hang
up
while
using
the
Speakerphone
Press
Speaker
button
that is Red
,
-or press
Line
button for the appropriate line,
-or press
End
Hang
up
while
using
the
Headset
Press
Handset
button,
（
Do not keep the headset mode),
-or press
End
(keep the headset mode)
Hang up one call, but preserve
another call on the other line
Press
End
,
-or refer to the above three methods
4.4 Using Hold and Resume (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at any time, and the other lines would be hold. As a result of that, you can
switch different calling line on our phone.
If you want to...
Then...
Put a call on hold
Press
HOLD
button,
-or press soft key
Hold a line and switch to another
line
Press another
Line
button for the appropriate line
Resume a call on current line
Press
Line
button,
Release a call on different line
Select the line want to release hold, press the line, so recovery;
Tips
•
Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow green
and flashing Line button.
4.5 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Then...
Talk
to
the
transfer
recipient
before
transferring a call
(consult transfer)
1) Press
TRANSFER
button or press XFER.
2) Enter number.
3) press
“
#”
（
default),
-or press
then transfer the call,
-or wait five
seconds(default)then transfer the call
Transferred to idle lines or
other
numbers
without
talking to the transfer
recipient
(Blind transfer)
1) Press
TRANSFER
button or XFER.
2) Press
;
3) Enter number.
4) Press
“
#”
（
default)
-or press
, then transfer the call.
-or wait five seconds(default)then transfer the call
Blind transfer to the
held line
1) Press
TRANSFER
button or press XFER.
2) Press the
Line
button of held line
