www.escene.cn/en/
Escene Communication
12
speakerphone
or
Programmable buttons
4) Press
‘
#
’
button
（
default),
-or press
;
-or wait 5s (default), then it sends the
number automatically.
Place a call using a
headset
Put on your headset and active
Headset
button, and then do as using
speakerphone
Redial
Press
REDIAL
button to dial the last number
-or press
Navigation Button-Right
>
“Dialed number”, select a number, and
press
Dial from a call log
1) Press
MENU
or
OK
button
>
“Call history”, you can select “Missed calls”,
“Received calls” and “Dialed numbers”,
- or press
Navigation button
(in Standby interface) > select
“Missed calls”
(
down
),
“Received calls” (
left
)
and
“Dialed numbers” (
right
)
)
.
2) Then press
button
.
Place a call while
Another call is active
1) Press
Hold
button or soft key
;
2) Press again the line one or the other line, you can enter another number.
3) Press
‘
#
’
button (default).
-or press
to send the number.
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go off-hook by lifting the handset or
pressing
,
Headset
or
Speaker
button.
• If you make a mistake while dialing, press
C
button to erase digits.
4.2 Answering a Call
You can answer a call by simply lifting the handset, or you can use other options if they are available on SayHi IP Phone.
If you want to...
Then...
Answer
with
a
handset
1) Your phone rings.
2)
Line
button of the ringing line is
Red
and flashing, Light strip is
Red
and flashing
；
Pick up the handset
Answer
with
the
speakerphone
(Non-headset mode)
Press
Speaker
button
-or press the flashing
Line
button,
-or press
Answer
with
a
headset
Put on headset, press
Headset
button so that
the status light is Red
, and then do as
using speakerphone
Switch
from
a
connected
Call
to
answer a ringing
call
1) Another
Line
button is Red
and flashing, Light strip is Red
and flashing.
2) Press the flashing
Line
button to answer (at this time, the original call will be hold.)
Auto-answer
1) Press
MENU
or
OK
button >
“Function setting” > “Auto answer”.
2) Select
“Enable”.
3) Your phone answers incoming calls automatically after a few rings
.
4.3 Ending a Call
To end a call, hang up. Here are some more details.
If you want to...
Then...
Hang
up
while
using
the
Return the handset to its cradle,
