8
For Customer Service Call 1-888-996-2729
© 2016 Escalade Sports
All RIghts Reserved.
STEP 4
PARTS REQUIRED:
2 pcs -
H2
M6 x 60 mm Allen Head Bolt
2 pcs -
H6
Plastic Bushing
2 pcs -
H4
Flat Washer
1 pc -
P5
Front Tube Assembly
2 pcs -
H5
Wing Nut
2 pcs -
P15
Locking Pin
Connect
P5
Front Tube Assembly using Spring Lock
as shown in
FIGURE 4.
NOTE:
Bungee Cord is an assembly aide and stays in place.
FIGURE 4
Spring Lock
Bungee
Cord
Spring Lock
Bungee
Cord
STEP 5
Connect
P5
Front Tube Assembly to
P1
-
Left
Lower Tube Assembly
and
P2
-
Right
Lower Tube Assembly using
H2
Bolts,
H4
Washers,
H6
Bushing and
H5
Wing Nuts as shown in
FIGURE 5
and
DETAIL B.
Note: This is a pivot point. “Snug” tighten H5 Wing Nuts only.
Make sure this assembly pivots freely.
P5
P5
P2
P1
P5
P1
H2
H4
H5
P15
H6
FIGURE 5
DETAIL B
NOTE:
Use
“bottom” hole
for this assembly.
NOTE:
Push
H2
Bolts
around the inner bungee
cord.