Esatto EVD7, Руководство пользователя

Страница: 23 / 28

esatto.house 23
Troubleshooting (Continued)
POSSIBLE FAILURES
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out a
service technician. Before contacting your local Customer Care team, please check possible cause of malfunction and
solution listed below. Once the problem has been eliminated, press the Start/Pause button to restart the program. If
after all checks, the problem persists, contact your local Customer Care team.
ERROR CODE FAILURE INDICATION DESCRIPTION ACTION
E1 Light dryness level LED will
flash Dryer temperature internal-
ly is too hot. The dryer may have been over-
loaded, ventilation is blocked or
the lint filter is blocked. Please
switch off the dryer (un-plug),
open the door and ensure the
load is correct. Ensure that the lint
filter is clean. Ensure the dryer can
ventilate correctly.
E2 Light & Standard dryness
level LED will flash Temperature sensor error Try switching the dryer off, unplug
and leave for 15 minutes. Recon-
nect the appliance and see if the
fault is fixed. If not, please contact
your local Customer Care team.
E3 Extra dryness level LED will
flash Temperature sensor error Try switching the dryer off, unplug
and leave for 15 minutes. Recon-
nect the appliance and see if the
fault is fixed. If not, please contact
your local Customer Care team.
ACCESSORIES, PARTS OR FURTHER SUPPORT
Should you need to purchase a replacement lint filter, or any other spare parts, please contact your local Customer
Care team, details of which can be found below.
Australia: Residentia Group
Online help: http://support.residentiagroup.com.au
Customer Care: 1300 11 4357
New Zealand: Applico
Online help: http://applico.co.nz
Customer Care: 0800 555 033
Fiji: Vinod Patel
Online help: http://www.vinodpatel.com.fj
Customer Care: +679 910 3111