Esaote MyLabX6, Начало работы

Страница: 47 / 124

S Y S T E M O V E R V I E W
MyLab
- G E T T I N G S T A R T E D 3 - 11
GETTI
NG STARTED
Control Panel Assembly Orientation
This assembly can be pushed up/down and laterally oriented to maximize
operator comfort; also, it can be rotated by 180° for optimal handling (closed
position).
These two rotations are controlled by two levers located below the control
panel (as shown in the drawings below).
Fig. 3-5: Orientation and lifting levers
The levers can be used to optimally adjust the control panel and the screen
into its working position.
The orientation lever, located on the left, allows lateral rotation of the
assembly.
The lifting lever, located on the right, allows to lift or lower the control panel.
The LCD can be directly
rotated and oriented
independently from the
control panel. Push the orientation lever to rotate the control panel into the new position.
Release the lever when the control panel is correctly positioned. This lever
allows to rotate by up to 90° clockwise and by up to 180° counterclockwise.
Push the lifting lever and acting on the handle to adjust the height of the
control panel. This lever allows a vertical displacement of ±20 cm.
Symbol
Orientation lever
Lifting lever