Esaote MyLabOmega, Начало работы

Страница: 61 / 118

P R E P A R I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 4 - 9
GETTI
NG STARTED
To steadily lock the system, all the wheels must be locked.
Do not park the system on a slope.
Do not use the brakes to park the machine on a slope.
Avoid any unnecessary mechanical shock to the system while moving it.
If your system is equipped with peripherals, make sure that they are safely
attached using locking belts; for transportation in a vehicle, it is strongly
recommended to remove the peripheral(s) and follow the device
manufacturer guidelines.
Transportation When transporting the system in a vehicle, remember to:

Disconnect and remove all probes and peripheral devices.

Close the LCD display being sure that the safety push-
buttons are closed.

Use the brakes to lock the system.

Fasten securely the system inside the vehicle.
MyLab Quick Displacement
When
MyLab
is equipped with batteries, the system can be quickly moved
from one working position to another without partially switching the system
off.
Wait for the pending operations to be completed and then disconnect the
mains cable: the system is automatically frozen keeping the LCD display off
and the control panel with the touchscreen on.
NOTE
Before disconnecting the system, verify the battery charging status by
clicking on the icon.
The touchscreen displays a message indicating the residual time after which
MyLab
will automatically start the shut down procedure.
NOTE
Fully charged batteries ensure more than half an hour of self-powering.
Move the system to the working position and connect it to the mains: the
LCD display is automatically turned on and the system is ready for its use.