Esaote MyLab XPro75, Начало работы

Страница: 125 / 144

P E R F O R M I N G A N E X A M
MyLab
- G E T T I N G S T A R T E D 7 - 6
At any time during the exam, a different probe can be selected tapping PROBE
or the new probe key on the touchscreen work flow area (available when
DIRECT PROBE SELECTION
is enabled).
Selecting Application
When a probe has been selected, on the middle of the touchscreen all the
application available with the selected probe are displayed. Tap the name of
the desired application to set it.
The blue rounded application indicates the active one.
At any time during the exam, a different application can be selected tapping
PROBE .
Selecting Preset
The Preset (or Clinical Setting) can be selected only when both the probe and
the application have been set. Tap the name of the desired preset to select it.
The blue rounded preset indicates the active one.
At any time during the exam, a different preset can be selected tapping PROBE .
At Preset selection the exam starts;
MyLab
enables the selected probe to
operate in the application and preset you selected.
WARNING
Before beginning the exam, ensure that the active probe displayed on the
screen matches the one selected.
Alternatively, the exam can be started also pressing
EN D EXAM
, END EXAM or
S TA R T E X A M
.
NOTE
You can program and add presets to better suit your individual clinical
needs or preferences, while applications depend on the installed optional
licenses.