Esaote MyLab XPro75, Начало работы

Страница: 117 / 144

C U S T O M I Z I N G M Y L A B
MyLab
- G E T T I N G S T A R T E D 6 - 22
System Info
Press
M EN U
then
SYSTEM I NFO
, the following information is displayed:

the model name and serial number;

MyLab
hardware ID, necessary for license generation;

the current installed software version and its build;

the BIOS revision;

the hardware level of the installed boards.
From this menu you can export the log file on a USB medium and you can also
check if the encryption is enabled or not (
ENCRYPTION MODE
).
Encryption Mode
Encryption allows to preserve health data storage confidentiality.
Encryption can be performed by Esaote Service personnel only. Encryption
can be applied to the internal hard disk and to one or more external USB
memory devices.
At the end of encryption a recovery key will be given to you. The recovery key
is stored on USB pen drive, or on file, or by printing it.
You have the responsibility to store the key in a safe place for future use.
NOTE
To make effective use of encryption it is strongly advised to use it with
security access enabled.
When data are encrypted, they can only be read on
MyLab
where the
encryption was performed.
When an encrypted USB memory device is connected to the
MyLab
where it
has been encrypted, data will be automatically unlocked and accessible.
When an encrypted USB memory device is connected to a different system,
data will remain locked and then not accessible.