Esaote MyLab 9VET, Начало работы

Страница: 83 / 116

C U S T O M I Z I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 6 - 13
GETTI
NG STARTED
Field SHUTDOWN TYPE
Various shutdown types can be set; the available options are listed in the table
below.
Table 6-4: Shutdown types
When the system is equipped with batteries, the
STANDBY AT POWER FAIL
field
is displayed. When checked, if you disconnect
MyLab
from the power supply
DIRECT PROBE
SELECTION
When checked, it allows to show on the
touchscreen work flow area icons of connected
probes for quick change. If the current application
is available on the new probe, the application is
maintained, otherwise it will be changed to the
default one at probe switching.
SHOW CONTROL
PANEL COMMANDS ON
MONITOR
When checked, functions related to joysticks and 1,
2, 3, 4 buttons are displayed on monitor.
TOUCHSCREEN Sets the brightness of the touchscreen.
CONTROL PANEL Sets the brightness of the control panel.
Fields Action
STANDBY When the OFF button is pressed,
MyLab
goes in
hibernation state saving all configurations allowing a
following quick boot-up. In these conditions
MyLab
can be unplugged from the main.
When
OPTIMIZE MEMORY USAGE
is checked, all
memory is erased to make repeated use of standby
more reliable over time. This results in a slowdown of
boot-up time.
SHUT DOWN When the OFF button is pressed,
MyLab
performs a
complete shut-down.
SHUT DOWN WITH
VIRUS SCAN
When the OFF button is pressed,
MyLab
performs an
antivirus scan and then a complete shut-down. If
viruses are found, the shut-down is not executed and an
information pop-up is displayed.
SHUT DOWN WITH
VIRUS SCAN ONCE
When the OFF button is pressed,
MyLab
performs an
antivirus scan and then a complete shut-down. At the
next OFF pressure the previous choice is restored.
Fields Action