manualshive.com logo in svg

Esaote 350009500, Начало работы, Страница: 42 / 114

Поделиться
Скачать
Esaote 350009500 Скачать руководство пользователя страница 42

MyLab

  -   G E T T I N G   S T A R T E D

4 - 2

Mobile Configuration

A height-adjustable trolley is available to set 

MyLab

 in a mobile configuration.

TThe trolley provides a handle and independent
brakes on four wheels to be easily moved.

The trolley is equipped with an internal
compartment to house and connect the AC/DC
adapter and an optional mains filter. 

It has a compartment for additional accessories.

The trolley can house an external peripheral to be
placed on the dedicated tray.

Peripheral

CAUTION

The peripheral weight may not exceed 3 kg. The shelf could be damaged if
the peripheral weight exceeds this limit.

CAUTION

The weight in the compartment for additional accessories may not exceed
3 kg. The compartment could be damaged if the  weight exceeds this limit.

CAUTION

The max. weight of the trolley is 63.5 kg. (including all options)

The base of the trolley offers the possibility to mount an optional UPS
(uninterruptible power supply) or an optional insulation transformer. 

CAUTION

Do not use the optional UPS in combination with the optional insulation
transformer or vice versa.

Note

When selecting the peripheral, consider its dimension so that it can
be safely installed on the console. The shelf measures 33x17 cm.

Содержание 350009500



















































































































Отзывы:

Нет отзывов