ES&S DS850 Скачать руководство пользователя

Страница: 20 / 199

Chapter 1: DS850 Overview

EVS5200_DOC_SOP_DS850

Software Version 2.10

Published: February 26, 2014

Training is determined at the time the system is purchased.



What checklist should be followed?

Use the

Acceptance Checklist

to ensure that the system has been delivered and is

performing as expected.

System Acquisition Procedures

Use the

Acceptance Checklist

to ensure that the system has been delivered and is

performing as expected. The following is a descriptive list of the DS850 acceptance
testing criteria.

Visual Inspection



Ensure that there are no scratches or gouges on any part of the unit.



Verify that all labels are placed in their appropriate place and in their correct
orientation.



Check the wheel locks on the table to ensure the cart rolls freely in the unlocked
position and does not when the wheels are locked.



Inspect the table’s folding extensions and drawer for proper operation.



Verify all locks and doors have a smooth function and are locked.



Open the rear door on the scanner and check for any loose connections or damaged
parts.



Ensure that all belts, transport rollers, and protective guards are in place.

Physical Inspection



Install the UPS, connect the printers and the scanner to the UPS, set up the printers,
and then turn on the UPS and the scanner. See

Chapter 5: Pre-Election Day Tasks

for

instructions.



Observe that both printers and the DS850 power on. If an election has been loaded,
at the Login screen, enter the Election Code.



Verify that the AC power icon is present in the upper right-hand corner of the screen
and that it indicates that the power connection is plugged in.



Verify that a red “X” is not displayed on the printer icons.



Perform Touch Screen calibration by selecting the Hardware menu and then pressing

Screen Calibration

. Touch the circle in the upper left-hand corner. When the screen

with a circle in the lower right-hand corner appears, touch that circle. Touch the next
screen in multiple places to verify that the pointer (x) will follow the touch points.
Then press the

Save & Exit

button.

Содержание DS850








































































































































































































Результаты поиска

Содержание DS850

Отзывы:

Похожие инструкции для DS850

Бренды по названию

Популярные бренды

ES&S DS850, Руководство оператора

Результаты поиска

Содержание DS850

Отзывы:

Похожие инструкции для DS850

Бренды по названию

Популярные бренды