8 MAINTENANCE AND STORAGE
0-5596
- 25 -
© ESAB AB 2021
8
MAINTENANCE AND STORAGE
Inspect the equipment daily and always check it if any sign of malfunction occurs.
8.1
Maintenance
The blower unit must be checked regularly and must be replaced if it is damaged and cause
leakage.
The filter must be replaced if broken, or when blocked and cannot provide enough air flow.
The breathing tube must be replaced if it is broken or has a crevasse.
The battery must be charged when the low battery alarm rings and replaced when no longer
can hold a charge.
Use a soft cloth to wipe the external surfaces. Do not use water.
The filter should be replaced together with the pre-filter.
8.2
Storage
The blower unit must be stored in a dry and clean area, in the temperature range of
14 to 131°F (-10 to +55°C) and relative humidity less than 90%RH.
If the equipment is stored at a temperature below 32°F (0°C), the battery must be allowed to
warm up to achieve full battery capacity. The equipment must be protected from dust,
particles, and other contamination.
If the equipment is not used for a long time, the battery should be removed from the blower
unit, fully charged, and stored separately.
