INSTRUCTIONS for
F15-577
November, 2004
SABRE "V" LIGHT-DUTY
WELDING AND CUTTING OUTFITS
These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the principles of operation and safe prac-
tices for oxy-fuel gas equipment, we urge you to read our booklet “Precautions and Safe Practices for Gas Welding, Cutting and
Heating” Form 2035. Do NOT permit untrained persons to install, operate, or maintain this equipment. Do NOT attempt to install or
operate this equipment until you have read and fully understand these instructions. If you do not fully understand these instruc-
tions, contact your supplier for further information.
The welding torch handle, cutting attachment and regulators covered by these instructions are listed by Underwriter’s Laboratories
only when used in combination with welding tips, cutting nozzles and parts manufactured by ESAB Welding & Cutting Products
to the specifications on file with Underwriter’s Laboratories, Inc. and when they are used in the gas service for which they are
designed and listed. The use of other welding tips, nozzles and parts voids the manufacturer’s warranty.
For packing purposes, the pressure-adjusting screw of the regulator may be either turned in or packed separately. If installed in
regulator, back out screw (turn counterclockwise) until it turns freely. If packed separately, install the screw in the regulator cap
and turn it in (clockwise) only one or two turns.
Be sure this information reaches the operator. You
can get extra copies through your supplier.
Brazing Outfit w/Tote, MC ............................. P/N 22552
Brazing Outfit w/Tote & Tanks, MC .............. P/N 22553
Brazing Outfits Include:
J28 Welding Torch ......................................... P/N QJ28
WJ-4 Welding Head ....................................... P/N QWJ-4
R-522-15-200A (MC) Acetylene Regulator ... P/N 22555
R-522-75-540 Oxygen Regulator ................. P/N 22554
Tote ................................................................ P/N 0558003632
3/16" X 12' A-A Hose ..................................... P/N 591F72
Goggles ......................................................... P/N 17862
Friction Lighter ............................................. P/N 790F34
Check Valve (Oxy) ........................................ P/N 6271725
Check Valve (FG) .......................................... P/N 6271726
Table 1 - Specifications
J28 Welding Torch
P/N QJ28
Welding Range ..........................................Thin Gauge to 3/4-in.
Length ..................................................................................6-in.
Weight ...............................................................................10 oz.
Torch-Hose Connections ...... Oxy (3/8" - 24RH) "A" Connection
F.G. (3/8" - 124LH) "A" Connection
CA1260 Cutting Attachment (90 deg. head)
P/N QCA1260
Cutting Range using acetylene ................................1/16 to 3-in.
Length ..................................................................................8-in.
Weight ...............................................................................12 oz.
Cutting Nozzles .................................................... 3 - 101 Series
If you desire to extend the range of this outfit, other welding heads (thin gauge to 3/4" thick steel) and cutting nozzles (1/8" to 3"
thick steel) are available for attachment to the QJ28 welding torch and QCA1260 cutting attachment (see tables).
Welding & Cutting Outfit w/Tote, MC ........... P/N 22550
Welding & Cutting Outfit w/Tote & Tanks, MC
......................................................................... P/N 22551
Welding & Cutting Outfits Include in Addition to Brazing
Outfit Items:
CA1260 Cutting Attachment ........................ P/N QCA1260
Q3-101 Series Cutting Nozzle ...................... P/N Q3-101-0
Outfits W/Tanks Include:
Tank "R" 20 cu.ft. - Oxygen ......................... P/N 22457
Tank "MC" 10 cu.ft. - Acetylene ................... P/N 22456
Welding Nozzles ......................................................... WJ Series
