2 INTRODUCTION
0459 087 687
- 7 -
© ESAB AB 2017
2
INTRODUCTION
The
Mig U5000i
is a GMAW/TIG welding power source, which can also be used for SMAW
(Shielded Metal Arc Welding).
There are four variants of the power source:
•
Mig U5000i without cooling unit
•
Mig U5000iw with cooling unit
•
Mig U5000i with WeldCloud™ unit
•
Mig U5000iw with cooling unit and WeldCloud™ unit
NOTE!
These instructions describe a Mig U5000iw with a cooling unit.
The power source is intended for use with the Feed 3004 or Feed 4804 wire feed units.
All the settings are made from the wire feed unit or control box.
The power source
Mig U5000i WeldCloud™
is combined with U8
2
and provides a control
box which enables wireless monitoring.
For more information about the feed units and WeldCloud™, refer to the Instruction manuals.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1
Equipment
The power source is supplied complete with terminating resistor and instruction manual.
Содержание Aristo WeldCloud Mig U5000i
Страница 2: ......
Страница 3: ......
Страница 21: ...DIAGRAM 0459 087 687 21 ESAB AB 2017 DIAGRAM...