ESAB Aristo Mig 4001i, Инструкция по эксплуатации, Страница: 7 / 26

2 INTRODUCTION
0460 740 001 - 7 - © ESAB AB 2017
2 INTRODUCTION
Mig 4001i is a welding power source intended for MIG/MAG welding, as well as for welding
with powder filled cored wire (FCAW-S), TIG welding and for welding with coated electrodes
(MMA).
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1 Equipment
Mig 4001i can be supplied with or without cooling unit. The cooling unit can be retro fitted.
The power source is supplied with:
• 5 m return cable with contact clamp
• 5 m mains cable with 32 Amp connector
• instruction manual for the welding power source
• instruction manual for the control panel (if applicable)
• instruction manual for the cooling unit (if applicable)
Instruction manuals in other languages can be downloaded from the Internet: www.esab.com
2.2 Control panel A24
Welding process parameters are controlled via the control panel. See the separate
instruction manual for a detailed description of the panels.