ESAB 0457 357 882, Инструкция по эксплуатации

Страница: 9 / 28

2 INTRODUCTION
0463 404 101 - 9 - © ESAB AB 2018
2 INTRODUCTION
The Miggytrac™ B501 and Miggytrac™ B5001 are designed for MIG/MAG welding of plates
and beams.
The Miggytrac™ B501 and Miggytrac™ B5001 are compact tractors on which a welding
torch can be fitted. Both tractors can be powered with 18 V DC from a lithium-ion battery. The
Miggytrac™ B5001 can also be powered with 42 V AC from a welding power source. The
tractors are equipped with four wheel drive for good traction and a high torque stepper motor
for stable welding speed. The Miggytrac™ is intended for welding with 4-stroke control mode.
As an option there is an easy fit magnet kit. The magnet kit can be attached at the bottom of
the tractor to further stabilize the movement when welding slopes up to 45°.
A battery and a battery charger are not included in the delivery, refer to the "ACCESSORIES"
chapter in this manual.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.