ESAB 0457 357 882, Инструкция по эксплуатации

Страница: 16 / 28

5 OPERATION
0463 404 101 - 16 - © ESAB AB 2018
5.3 Operation of the Miggytrac™ B5001 tractor
5.3.1 Connections and control devices
1. Menu based setting panel consisting of a
graphical colour display and push buttons 2. 12-pin connector for connection to the
remote control outlet of the wire feeder.
For installation of remote adapters, see the
instruction manual for the wire feeder in
question.
5.3.2 Setting panel including colour display
1 Colour
display
Graphical and digital information
2 Menu
Button is
locked 10 s
after it was
depressed
latest.
Before start: Selections for programming
of all parameters
After start: Selections for programming of
certain parameters
A LED indicates the selected parameter.
3 Start left One click: Start left without welding
Double-click: Start left welding
One click after start: Reducing the speed
In the menu: Reducing the value
4 Stop Stop tractor/welding
In the menu: Locks the menu
5 Start right One click: Start right without welding
Double-click: Start right welding
One click after start: Increasing the speed
In the menu: Increasing the value