manualshive.com logo in svg

ESA VT130W, Руководство по оборудованию

Поделиться
Скачать
ESA VT130W Скачать руководство пользователя страница 797

405.1200.037.2 - Rel.: 2.21 of 25/02/2008

37-27

Vertical 
VT1x5W 
alarms

The page has the following format:

• Numerical identification of the ISA-1A alarm.
• Five rows of 21 characters with character height of X1 or three rows of 

10 with character height of X2 for the text of the message.

• One row for any data field (which in that particular situation could indi-

cate a safety or warning limit value).

• One row starting with the character [

>]

 for the date and time of the 

appearance of the event (Event in).

• One row starting with:

• the character [

#]

 for the date and time of the Event acknowledged 

but still present.

•  the character [

<]

 for the date and time of the Event out but not 

acknowledged.

• Graphic indication of the status of the alarm:

• Event in and not acknowledged [

]

• Event in, present and acknowledged [

]

• Event out and not acknowledged. [

]

Examples with three alarms:

HELP

The pressure in
the tank exceeds
the max. limit

150.0

First
alarm

>01-07-1998 11:32a

ESC

When you press [ ] the next page appears con-
taining the second alarm. Note that the second 
alarm is accompanied by the character [<] fol-
lowed by the date and time, indicating that the 
event triggering the alarm disappeared before 
the acknowledgment operation. All this is also 
emphasized by the appropriate symbol.

0001

HIST

Содержание VT130W

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды