Chapter 2
HARDWARE INSTALLATION
User's Manual
19
X
Jumper Settings
SW4
Clear CMOS
(SW4)
If any anomaly of the followings is encountered —
a) CMOS data is corrupted;
b) you forgot the supervisor or user password;
c) failure to start the system due to BIOS mis-configuration
— it is suggested that the system be reconfigured with default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Press SW4 for a few seconds.
3. Plug the power cord back in and and power on the system.
10
1
11
2
12
3
10
1
2 6
2 1
1 5
10
11
12
1
