Chapter 2
HARDWARE INSTALLATION
User's Manual
14
X
Assembly
SSD Tray
The SSD Tray can be mounted with a 2.5" SATA SSD and secured onto the system board for
storage. Please follow the steps below for the assembly.
1.
Place the SATA SSD into the SSD tray while making sure the SATA connector can be
access.
2.
Screw in the four black screws provided in the package to secure the SSD in place.
3.
Screw in the four black
screws provided in the
package to secure the SSD
in place.
x3
4. Connect the SATA cable
and the SATA power ca-
ble to the SSD and the
board connectors.
x4
Note:
After the SATA SSD is correctly mounte, please attach the bottom cover back on
as previously instructed
