i-CON 1 / 35
3BA00180 • 8.04.008 • Rev. 1
Operating instructions
6.8
Changing the Heating Element
Before changing a heating element:
■
Switch off the station and let the soldering tip cool off. Subsequently
remove the soldering tip as described above.
Attention!
Only replace the heating elements when they are cold
- burn hazard!
6.8.1 i-Tool
■
Position the tweezers tool between handle
a
and thread
b
■
Loosen the heating element by levering it slightly
■
Pull out the loosened heating element
OFF
40°C
72°F
_
OFF
40°C
72°F
_
