5
VIVO-M201(M)
Quick installation and programming guide
English
IMPORTANT
NOTE
This quick guide summarises the full installation manual. The full manual contains safety warnings and other
explanations that must be taken into account. You can download the latest version of this guide and the
installation manual in the "Downloads" section of the Erreka website:
http://www.erreka-automation.com
The options and functions described in this guide are applicable from the
firmware
version indicated on the
circuit. As part of a process of continuous improvement, the
firmware
is subject to the incorporation of new
functionalities or their extension, and consequently to the generation of new versions not necessarily
compatible with the previous ones. Therefore, if your
firmware
version is lower than the one indicated in
this guide, some options and functions may not be available or may be different.
ELECTRICAL CABLING:
Element
Nº wires x section
Maximum length
A: Main power supply
3x1.5mm
2
30m
B: Flashing light
2x0.5mm
2
20m
C: Photocells (Tx / Rx)
2x0.5mm
2
/ 4x0.5mm
2
30m
D: Key switch
2x0.5mm
2
25m
E: Operator
4x0.75mm
2
20m
F: Antenna
Coaxial cable 50
k
(RG-58/U)
5m
Elements of the complete installation
MS
A-098/04
firmw
a
re V2.05 (V
IV
O-M201
) / V2.06 (V
IVO-M201M) or later