Errebi ALFA PLUS, Инструкция по эксплуатации

Страница: 6 / 24

6 >>>
ENGLISH
>>>
Milling cutter
4-sided clamp
Clamp handle
Slide
Slide handle
Fold-away stop
Tracer point
Start switch
Tracer point adjustment control
Plane
Slide advance lever
See Figure 2
1
2
3
4
5
6
7
8
9
Head
Neck
Top shoulder
Bottom shoulder
Teeth
Blade
Back
Tip
1
2
3
4
5
6
7
8
The ALFA PLUS machine is a robust and precise manual
machine for cutting flat cylinder lock keys, vehicle keys,
cross-shaped keys and special keys.
The ALFA PLUS key cutting machine has been designed
taking into account the safety standards currently in
force in the EU.
Although the machine is not difficult to install, it is best
not to try to install, adjust or use it without having first
read this manual.
The machine leaves our factory ready for use and only
requires the carrying out of calibration operations for
the tools that are going to be used.
The machine comes packed in packing of the following
size:
Width = 570 mm, length = 520 mm, height = 410mm
Machine weight plus packing = 20 Kg.
When the machine has been unpacked, check carefully
to see if it has suffered any damage during transporta-
tion. If you find any problems, please inform the carrier
immediately and do not do anything with the machine
until the carrier’s agent has carried out an inspection.
The ALFA PLUS key cutting machine has an identifi-
cation label, giving the serial number, the name and
address of the manufacturer, the CE mark and the year
of manufacture.
See figure 1
The main technical information is as follows:
Motor:
Single phase 220V, 50Hz, 0.18Kw,1500 rpm,
1.2 Amp. or Single phase 110V, 60Hz,0.18Kw, 1800 rpm,
2.3 Amp.
Milling cutter:
Extra quick speed steel ∆63 x 16 x5 mm.
Speed:
1,500 rpm.
Clamps:
4 sided.
Displacement:
On self-lubricated bearings.
Effective travel:
X axis = 70 mm.
Dimensions:
Width = 530 mm, Depth = 245 mm,
Height = 280 mm.
Weight:
16,5 Kg.
10
11
Presentation and general points
1.1 GENERAL POINTS
1
Machine characteristics
2
1.2 TRANSPORT AND PACKAGING
1.3 IDENTIFICATION LABEL
2.1 PARTS OF THE KEYS
2.2 MAIN PARTS OF THE MACHINE
2.3 TECHNICAL DATA