RX CARD 4CHPP
1A - Main features
This receiver mod. SEL2641R433-PP4 is a card receiver with 4 push-
pull outputs. It has a very high security coding system (KeeLoq ®
Hopping code).The operating frequency is among the European
harmonised frequencies; the code sent by the transmitter changes at
every activation, avoiding any scanning and copying risk.
A special algorithm allows to keep synchronyzed transmitter and
receiver. The receiver has 4 digital outputs with push-pull
SEL2641R433-PP4
NO
TICE
INSTRUCTIONS
1B - Technical specifications
Receiver type
Superheterodyne
Carrier frequency
433,92 MHz
Local oscillator frequency
6,6128 MHz
Demodulation
AM/ASK
Local Oscillator
VCO / PLL
Channel width
> 25 KHz
Intermediate frequency
10.7 MHz
Input sensitivity
-115 dBm
Local oscillator spurious emissions
< -57 dBm
Input load:
50 Ohm
Power supply:
12 Vdc
Consumption:
11 mA
Outputs
4
Output type
Push-pull
Max sink current on 4 outputs
25 mA
Max source current on 4 outputs
25 mA
Max sink/source current on 1 output
125 mA
Memory capacity
85 user codesTX
Security code
Rolling code
64
Max code combination number
2
Operating temperature
-20°/+80°C
Weight
gr. 9
Overall dimensions (mm)
44 x 42 x 8
configuration and current in sink and source of 25 mA
The receiver has a special pin-out so it can be connected only to
compatible appliances.
Hereby, CDVI Wireless Spa, declares that the radio equipment type
SEL2641R433-PP4 is in compliance with directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the
following internet address: www.erone.com.
COMPATIBLE TRANSMITTERS
!
Type S2TR2641E2: 2 key transmitter
!
Type S2TR2641E4: 4 key transmitter
!
Type SETR2641AM2: 2 key mini transmitter
SUMMARY
1A - Main features
1B - Technical specifications
1C - Layout and connections
1 - INTRODUCTION
2 - TRANSMITTER MEMORIZATION
3 - SINGLE TRANSMITTER CANCELLATION
4 - MEMORY ERASURE
5 - MEMORY FULL
Thank you for choosing a this product.
You are recommended to read carefully this manual before installing the
product.
