4
IS-C5PERUK Rev. 0 del 5/4/2013
Manufactured by
Via Piave, 23 - I-31020 S.Pietro di Feletto (TV) - ITALY
Tel. 0438.450860 - Fax. 0438.455628
e-mail: [email protected]
Web: www.erone.com
ELPRO INNOTEK S.p.A.
THE SMART LIVING
P1
P1
P1
Keep P1 pressed down for
more 4 sec. until LR3+LV
make 3 long flashes
P1
Keep P1
pressed down
for 2 sec. until
LR1 turns on
Release
P1
LR1
turns on
LR3+LV
3 flashes
GUARANTEE
The guarantee period of this products is 24 months, beginning from the manufacturer date.
During this period, if the product does not work correctly, due to a defective component, the product will be repaired
or substituted at the discretion of the producer. The guarantee does not cover the plastic enclosure integrity.
After-sale service is supplied at the producer's factory.
DIP-SWITCH 1
Set to ON the switch corresponding to the relay to activate,
i.e.
-->
SW1 = ON, SW2, SW3, SW4 = OFF
ONLY Relay 1 activated.
i.e.
-->
SW1 = ON, SW2 = OFF, SW3 = ON, SW4 = OFF
Relays 1, 3 activated simultaneously
DIP-SWITCH 2
ON
OFF
1 2 3 4
DIP-SWITCH 3
CHANNEL 3 - LED LR3
( RED )
ON
OFF
1 2 3 4
DIP-SWITCH 4
CHANNEL 4 - LED LV
( GREEN )
ON
OFF
1 2 3 4
DIP5-SWITCH 5
RELAY 5 ( COMMON )
The relay 5 can be activated simultaneously with each relay ( 1,2,3 or 4, depending by the
settings of DIP5.
Set to ON the switch corresponding to the channel which activates simultaneously even the
relay 5.
i.e. : sw1, sw2, sw3, sw4 = OFF : relay 5 NEVER ACTIVATED
i.e. : sw1 = ON, sw2, sw3, sw4 = OFF : relay 5 activated by Channel 1
i.e. : sw1 = ON, sw2 = ON, sw3, sw4 = OFF : relay 5 activated by Channel 1 or
Channel 2
1 2 3 4
1 2 3 4
DIP-SWITCH CONFIGURATION
Each dip-switch sets the relay or the relays activated by the corresponding channel.
ON
OFF
CHANNEL 1 - LED LR1
( RED )
ON
OFF
CHANNEL 2 - LED LR2
( RED )
FULL MEMORY ERASURE
THE SMART LIVING
1
ERONE 4+1 RELAY RECEIVER SEL2641R433-C5P
INTRODUCTION
The receiver Erone type SEL2641R433-C5P is designed for the control of oleodynamic systems thanks to the 5 output
relays . The main 4 relays gives a C-NO-NC dry contact when the transmission is correctly decoded , the fifth relay can
be activated together to one on them . The memorisation of the transmitter code into the receiver memory can be done
in self-learning mode with one button.
The appliance full complies with the European Directives 89/336/EEC,
73/23/EEC and Regulation EN 60950
TECHNICAL SPECIFICATIONS
Receiver type
Superheterodyne
Local oscillator frequency
6,6128 MHz
Modulation
AM/ASK
Input impedance
50 Ohm
Input sensitivity
-115 dBm
Local oscillator emissions
< -57 dBm
Power supply
Consumption
270 mA
Relays
4 + 1
Relay operating mode
Pulse / Latch
Min applicable power
1A / 6V
User codes max
85
Operating temperature
IP Grade
Weight
400
Overall dimensions (mm )
110 x 110 x 60
Selflearning radio memorisation
yes
Carrier frequency
433.92 MHz
12 / 24 Vdc
Max applicable power
20A / 27V - max 300W
Outputs relays
C - NC - NO
Security protocol
Keeloq hopping code
-20°/+70°C
IP56
gr.
