Orion/3-DN Outdoor
66
FIX FOCUS
If focus movement is detected, the alarm will be triggered, and the
alarm stops when focus returns to the original position. If the
detected focus movement keeps changing for more than four
seconds, the new focus position will be memorized as the reference,
and the alarm will stop.
NOTE:
The INT FOCUS and FIX FOCUS detect modes will
be activated only with the Auto Focus mode.
INT AE (Internal AE)
When Auto Exposure (AE) movement is detected, the alarm will be
triggered; if the Exposure Level returns to the original level, the
alarm will stop.
FIX AE
The alarm will be triggered if the Exposure value changes; if the
adjusted AE value retains for four seconds, the value will be saved
as the reference, and the alarm will stop.
MOTION
Motion Detection function allow detecting suspicious motion and
triggering alarms when motion volume in the detected area
reaches/exceeds the determined sensitivity threshold value. The
main menu is shown as below:
BLOCK MODE
In Motion Detect Mode, users can set Block Mode as
“ON” or “OFF”.
When BLOCK MODE is turned on, if there are any variations (e.g.
caused by intrusion) in the sections of the monitoring image, the affected
parts will be highlighted dynamically.
ALARM DETECT
DETECT SWITCH OFF
DETECT MODE
MOTION
BLOCK MODE
ON
FRAME SET
01
FRAME DISABLE
01
THRESHOLD
016
EXITD
YES