Orion/3-DN Outdoor
60
AUTO
The Internal circuit will automatically decide the occasion to remove the
IR cut filter according to the image brightness level.
NOTE:
When IR function is in AUTO mode, AE will automatically
become AUTO mode. Additionally, if AE is set as Shutter, Iris and
AGC priority mode, the IR AUTO function will be invalid. To
resume IR AUTO function in this case, users can 1) adjust AE to
AUTO mode; 2) adjust IR function to ON/OFF mode, and then
switch back to AUTO mode.
ON
Select the item to remove the IR cut filter.
OFF
Select the item to disable IR function.
NOTE:
When Alarm Detect function (refer to
3.3.19 ALARM
DETECT)
is turned on, IR function will be automatically switched to
ON/OFF mode.
Sub-menu of IR Function:
THRESHOLD
The Dome Camera will remove the filter immediately when the
threshold value is reached. For the M model, the threshold options
are <LOW>, <MID> and <HI>. <LOW> threshold indicates a higher
sensitivity and can improve reliability of lens so that it is easier to
switch to Day mode and relatively difficult to change into Night mode;
while <HI> indicates that it is easier to switch to Night mode and
difficult to change into Day mode. For the P Model, the IR threshold
value ranges from <1> to <13>. At value <1>, the camera will be
most inclined to convert to color mode from B/W mode, while at
value <13>, the camera comparatively tends to stay in B/W mode.
IR FUNCTION
THRESHOLD
LOW
IR COLOR
COLOR
EXIT
＋
SAVE
YES
