ERNITEC MicroView MVID-03IR-E Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 59

ERNITEC MicroView MVID-03IR-E Скачать руководство пользователя страница 5

Network Dome Camera

·

Quick Start Guide

5

The precaution measure is divided into “Warnings” and “Cautions”

Warnings:

Serious injury or death may occur if any of the warnings

are neglected.

Cautions:

Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

●

Proper configuration of all passwords and other security settings
is the responsibility of the installer and/or end-user.

●

In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region. Please
refer to technical specifications for detailed information.

●

Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 24 V AC or 12 V DC
according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.

●

Do not connect several devices to one power adapter as adapter
overload may cause over-heating or a fire hazard.

Warnings

Follow these

safeguards to prevent
serious injury or death.

Cautions

Follow these

precautions to prevent potential
injury or material damage.

«
...
3
4
5
6
7
...
»

Содержание MicroView MVID-03IR-E




























































Отзывы:

Нет отзывов