ERNITEC MicroView MVIB-04IR-E, Руководство пользователя, Страница: 139 / 171

Network Camera User Manual
134
Note:

The detection line should be drawn at the position right below the
camera, and it should cover the whole entrance/exit.

Don’t draw the line at the place where people may linger.
4) You can click to delete the detection line.
5) You can click to change the direction. The yellow arrow indicates the
direction of entering.
4. Check Camera Calibration checkbox to enable camera calibration. A calibration
line (the green vertical line) and several blue horizontal lines appear in the live
view image.
Camera Calibration: You set the width (usually the shoulder breadth) of a
person for counting. Well-set calibration parameters will help increase the
counting accuracy.
Blue Horizontal Lines: One blue line indicates the detected width (usually the
shoulder breadth) of a passing person. Up to eight blue lines can be shown on
each side of the detection line. These lines are reference for calibration setting.
Calibration Line (Green Vertical Line): The distance from the left endpoint to
the calibration line (calibration line width) indicates the set width of a person.
You can drag the calibration line to adjust the distance according to the blue line
distribution.
Advanced: You can precisely adjust the position and the size of detection line
and calibration line.
1) Dragging the cursors or inputting values in the text fields to set the Detection
Line Start Point and the Detection Line End Point.
2) Click to refresh the suggested calibration line width calculated by the
system automatically.
3) Dragging the cursor or input a value to set the calibration with. You can set
the value as suggested, or you can set according to your actual need.