OSD Setup Manual
www.ernitec.com
23
Select <DDNS Setup> from Network Setup and press ENTER. The menu displays
as below.
DDNS Setup
Enable DDNS
Host Name
DDNS Port
Submit/Update
ezDDNS
ON
XXXX_XXXXXX
80
No
No
-
Enable DDNS
The item is used to enable or disable the Dynamic Domain Name Service.
Select <ON> to enable the service, or <OFF> to disable.
-
Host Name
The item allows users to setup a domain name, which is used for
entering the
ERIS H.264 DVR
through internet on the remote PC.
To setup the host name of the unit, follow the steps.
•
Select <Host Name> from DDNS Setup menu and press ENTER. A
virtual keyboard displays as below.
Host Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
.
! @
#
−
_ , “ + = *
◄
►
Backspace Delete
Cancel OK
•
Use Direction keys to select character.
•
Press ENTER to add the selected character to the entry field.
•
When it’s done, move the cursor to <OK> and press ENTER to save
the settings and exit.
NOTE:
Each
ERIS H.264 DVR
should have a unique host
name.
-
DDNS Port
The item allows users to setup the port for DDNS. Press UP / DOWN
Direction keys to change the port.
