ERNITEC EDNS V3000 Series, Руководство пользователя

Страница: 47 / 124

46
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
3.6.5.2 Alert Notification
4 options are included in this item: <OFF>, <Event>, <Alive>,
and <Both>.
< OFF >: The Alert Notification is turned off.
< Event >: When the alarm is triggered, the DVR will send an alert
message to the CMS.
< Alive >: The DVR will send an alive message to the CMS every
N second just to show you that the connection
between the DVR and CMS is in effect. The time
interval N can be adjusted in <Alive Interval>.
< Both >: This enables the DVR to send both Event and Alive
alert messages to the CMS.
3.6.5.3 Alert IP
The Alert IP must match the IP address of the computer installed
the CMS.
3.6.5.4 Alert Port
The ports for DVR and the CMS Alert MUST be the same.
3.6.5.5 Alert Interval
Users can define the time interval (1 to 255 seconds) between
each alive message.
3.6.6 Event Full Screen
This function allows the DVR to display the alarm channel in full
screen size when an alarm is triggered. Select <None> to disable
this function; select <Main> to display the alarm channel on Main
Monitor when an alarm is triggered; select <Call> to display the
alarm channel on Call Monitor; and select <Both> to display the
alarm channel on both Main Monitor and Call Monitor.
3.6.7 Event Duration
This item determines the duration of the buzzer and Alarm Out
relay function after an alarm is triggered. The available event