ERNITEC EDNS V3000 Series, Руководство пользователя

Страница: 27 / 124

26
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
3.4 System Date / Time Setting
Users can set the current date, time and other OSD parameters
in Date/Time menu (under System Setup menu). The login
account should have authority to access the System Setup menu.
In OSD setup menu, select <System Setup> and press ENTER,
then select <Date/Time> to access the Date/Time menu; the
menu displays as follows.
Date/Time
Date
Time
Time Zone
Date/Time Display
Date Display Mode
Time Display Mode
Daylight Saving Time Setup
Network Time Protocol Setup
2011/02/21
PM 10:39:26
OFF
ON
Y/M/D
12 HR
ENTER
ENTER
3.4.1 Set Date / Time
Set Date / Time
Select <Date> / <Time> and press ENTER to adjust the settings.
LEFT / RIGHT keys are used to move the cursor to previous or
next field, ENTER is for selecting, and UP / DOWN are used to
change the value in the selected field.
NOTE: The new date / time setting applies to record new
video. The date and time of previously recorded video will
not be changed.
NOTE: If time settings have to be changed in any case, it
is strongly recommended to format the HDDs to avoid
database corruption.
Date / Time Display
Select <ON> or <OFF> to setup whether to display date/time
information on the screen. Press ENTER and use the UP /
DOWN keys to change the setting.