Use and maintenance manual
Automatic conveyor belts punching machine
Model: PAF-301
____________________________________________________________________________________________________________________
P a g . 1 5
REMARK:
It is always recommendable to press the RESET MACHINE before starting any job to put
the gauges to “0” and position the mechanisms.
Once the machine has been reset, press START to start the job.
We can stop the cycle at any moment pressing on STOP and re-initiating again with START.
This allows us stopping or pausing the cycle without losing the positioning memory of the
drives,
WARNING:
IF THE EMERGENCY BUTTON IS PRESSED DURING OPERATIONS IN START MODE, THE
POSITIONING VALUES WILL BE LOST AND WE HAVE TO RESTART THE WORK PRESSING
ON RESET.
During the punching process, if the safety barriers are crossed. In this way, we can restart
the process keeping the values pressing START.
On the screen we can see how far the belt has progressed, the position of the cutting head and
the number of rows and patterns punched.
Manual.
In the Manual Mode, we can execute a punching test to adjust the pressure or the cutting time.
To this purpose, we will feed the machine with a sample of the same material and press on the
Punching ON.
