Use and maintenance manual
Timing belt welder
Model: LRSE-180
_______________________________________________________________________________________________________________________
P a g . 4
-
Description:
Continuous longitudinal welder and milling V-guides for timing belts using a milling tool to pull
out fabrics and hot air blower to weld a profile. Fitted with speed, temperature and pressure
controls for different types of material.
-
Technical Characteristics:
Dimensions
1995x900x1870 mm (LxWxH)
Weight
538 kg
Max. Belt Width
1250 mm
Max. Belt Thickness
12 mm
Motor milling
1x 750 W
Motor belt
1x 250 W
Leister Welder
1x 1600 W
Voltage
1x230 V 50/60 Hz
Air pressure
6 bar
-
Standard equipment:
•
One Leister head
•
One milling head
•
5 V-guides pulleys
•
5 Milling tools
•
One vacuum system
-
Warnings and safety
:
−
ERM Engineering recommends the users of this machine to fully read this user’s manual
prior to its use to guarantee safe work.
−
It also advises and recommends equipment not being used by unqualified staff who have
not received prior training from ERM Engineering
−
A copy of this manual delivered along with the machine must always remain at hand during
its use, both for the production operators as well as the maintenance managers.
NOTE: ERM Engineering shall not be held liable under any case for damage caused by
undue or improper use of this equipment.
−
Any repairs or modification of the machine performed by personnel not qualified by ERM
Engineering or use of non-original spare parts provided by persons unrelated to the
company, shall give rise to loss of the manufacturer’s guarantee.
