ERME SV1 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 51

background image

7 | Control/operation

Erme AG

36 / 51

Sous vide basins

7.6.2 Setting parameters

7.6.2.1 Setting the required water temperature value

Proceed as follows to set the desired water temperature:

1 Call up the "Water temperature" display mode by pressing the "MODE/ESC"

button.

ð

The current water temperature is displayed.

2 Press the "SET" button.

ð

The required value currently set for the water temperature is displayed and
flashes in the display.

3 Using the "

" and "

" buttons, set the desired required temperature. Press

and hold one of the buttons to move through the increments faster.

4 Either press the "SET" button to save the changed setting or the "MODE/ESC"

button to discard the change.

ð

The current water temperature is displayed.

7.6.2.2 Setting the required core temperature value

The core temperature is monitored if the food thermometer is connected to the
unit.

Proceed as follows to set the desired core temperature:

1 Call up the "Core temperature" display mode by pressing the "MODE/ESC"

button.

ð

The current core temperature is displayed.

NOTE

• If the food thermometer is not connected, "---" is displayed.

• If the thermometer is inserted, the unit detects this

automatically. The unit indicates this via an acoustic signal. If no
thermometer is inserted, the set threshold is never reached and
an alarm is never output.

2 Press the "SET" button.

ð

The required value currently set for the core temperature is displayed and
flashes in the display.

3 Using the "

" and "

" buttons, set the desired required temperature. Press

and hold one of the buttons to move through the increments faster.

4 Either press the "SET" button to save the changed setting or the "MODE/ESC"

button to discard the change.

ð

The current core temperature or "---" is displayed.

«
...
34
35
36
37
38
...
»

Содержание SV1




















































Отзывы:

Нет отзывов

Похожие инструкции для SV1

Relion 670 series

Бренд: ABB Страницы: 66

Бренд: NAD Страницы: 10

Coronis 5MP Mammo

Бренд: Barco Страницы: 4

Бренд: Barco Страницы: 167

Color Coronis 2MP

Бренд: Barco Страницы: 156

Color Coronis 2MP

Бренд: Barco Страницы: 12

Бренд: Barco Страницы: 39

Бренд: Barco Страницы: 158

Бренд: ECE Страницы: 2

Evolution Series

Бренд: Bakare Страницы: 38

Бренд: Patty-O-Matic Страницы: 28

Бренд: IDEAL Networks Страницы: 10

Бренд: Omlet Страницы: 2

Бренд: Omicron Страницы: 382

Бренд: Omicron Страницы: 188

Бренд: EFX Страницы: 2

Бренд: schmersal Страницы: 20

Бренд: Launch Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды