ERL tesla lite, Руководство пользователя, Страница: 225 / 288

12 Maintenance Menu and Error Handling
D03283R01.10 TESLA LITE User Manual 12-3
Figure 12.1: Maintenance Menu
Maintenance
Menu
Commands
Table 12.2: Menu Commands
1. Modify IP Addresses, sub-
net mask and default gate-
way
Modify the LAN IP addresses, default subnet mask and
default gateway.
2. View system diagnostic Displays the TESLA LITE’s internal status log.
3. Retrieve system diagnos-
tics
Automatically packages up the internal status log plus setting
and setup information and downloads it in compressed form
to your computer. This file can then be sent to ERLPhase
customer support to help diagnose a problem.
4. Restore ALL default set-
tings
Restores ALL factory defaults including settings, calibration
and setup parameters.
5. Restore only default
recorder configuration set-
tings
Restores the default settings that define channels, sample
rates and triggers.
6. Restore only default sys-
tem setup
Restores the default values for the setup parameters includ-
ing communication settings, record controls, time controls
and passwords.
7. Force hardware reset Manually initiates a hardware reset. Note that the communi-
cation link is immediately lost and cannot be re-established
until the unit completes its start-up.
8. Network utilities Enter network utilities sub-menu.
9. Monitor SCADA Shows real time display of Modbus or DNP 3 data.
10. Save recent trend data Saves any accumulated Trend Data that hasn’t yet been
saved to disk. This should be executed prior to [7] Force
Hardware Reset if trend logging is enabled.