ERL tesla lite, Руководство пользователя, Страница: 128 / 288

9 Record and Log Management
9-2 TESLA LITE User Manual D03283R01.10
Record
Summary
The right side of the Records tab shows summary information on the selected
record. The summary includes the list of events which occurred during the
time-span of the record from the recorder’s event log.
For cooperative group records, the event list cannot be displayed until the re-
cords have been transferred to TESLA Control Panel and combined.
Get Remote
Summaries/Get
Remote Events
When both Get Remote Summaries and Get Remote Events options are
checked, Control Panel accesses and displays the corresponding recording in-
formation in the
Record Summary and Events sections of the right-hand pane.
You may eliminate the delay involved in accessing this information by dis-
abling the corresponding check-boxes.
Autopoll/
Autoprint
When Autopoll is checked, Control Panel will periodically (default 60 seconds)
poll the connected TESLA LITE recorder for new record files and automati-
cally transfer them to the local computer. Newest records will be transferred
first, and only one new record will be transferred at each poll. Checking
Auto-
print will cause each transferred (via Autopoll) record file to be automatically
printed on the default Windows printer using RecordGraph’s default template.
Note that the Autopoll and Autoprint states are not persistent; if Control Panel
is disconnected from the recorder, both Autopoll and Autoprint become un-
checked.
Autopoll and Autoprint are also disabled when the Records screen is closed.
Graph
Records can be viewed with RecordGraph, ERLPhase’s interactive graphing
software. To launch RecordGraph, select one or more local records and select
the
Graph button.
Get from IED
Selecting a recorder file under On IED and then selecting the Get from IED
button causes a record file on the IED to be transferred from the recorder to
your local computer. More than one file can be transferred at the time using
Windows file selection function (
Control / Shift + left -click). This action will
not delete the record on the IED.
Get from IED
and Delete
The Get From IED and Delete button erases the records on the recorder after
they have been transferred to Control Panel and verified.
When connected to a cooperative group, Get From IED automatically transfers
the corresponding record from each group member and combines them into a
single group record (“Record Export Utility” on page 11-1).
Save As
Selecting a local record and selecting the Save As button copies a record to a
specified file. The .tlr file suffix should be retained.
Export
Selecting a local record and selecting the Export button launches the Export
Utility. Records can be exported in common formats such as COMTRADE for
use in other software or playback, “Record Export Utility” on page 11-1.