ERL tesla lite, Руководство пользователя, Страница: 103 / 288

8 Configuring the Recorder
D03283R01.10 TESLA LITE User Manual 8-25
Settings
Figure 8.16: Sequence Channel Configuration Screen
Table 8.11: Sequence Component Channel Settings
Element Identifies the group to which this channel belongs. The Element forms
the first part of the channel name. The Element is selected when the
channel is created and is fixed once assigned when you are working
in the Element Tree view.
Type Identifies the type of signal being applied to this input channel. The
Type forms a part of the channel name (Element:Type:Description).
Selecting the appropriate Type can simplify channel naming by elimi-
nating the need for the optional Description field (e.g. Line #1:VSeq
uniquely defines the channel). Initially set when the channel was cre-
ated, the Type can be changed to refer to a different phase as
needed.
Description Optional field (12 characters). Provides an additional description of
the channel that forms part of the channel name. Use if Element
Name and channel Type do not sufficiently identify the channel.
(“Channel Grouping and Naming” on page 8-7).
Sequence Index Identifies the Sequence Component channel. Unlike the analog and
external input channels, this is not associated with a hardware input,
but simply identifies which of the internal virtual summation channels
will be used.
You can select any available channel without restriction. If the only
option is “undefined”, you have already used all available channels.
Phase A, Phase B,
Phase C Identifies the channels used to create the sequence set. The list is
limited to channels of the correct type (voltage or current) and
includes analog input or summation channels which have already
been defined. The list grows automatically as you define new chan-
nels.
Trigger Settings
Rate of Change
Interval Specifies the period of time over which both positive and negative rate
of change is measured. 0.5 to 8.0 cycles.