ERIS PG ERIS-414, Руководство пользователя

Страница: 54 / 58

Appendix B. Failures
54
A
PPENDIX
B. F
AILURES
Gas detector PG ERIS-414 has self diagnostic function that helps to detect
failures. In case the gas detector does not work or works incorrectly, check possible
failures of gas detector PG ERIS-414 that are indicated in DEVICE STATUS
submenu, here you could see the error code and take required correction actions.
The short list of error codes is presented in the table below.
The complete list of errors and troubleshooting procedures is described in the
repair manual and is available on request.
Code Error
A01
Critically low battery charge level, the device will be switched off
immediately.
A04 Low battery charge level
A07 Indication range is exceeded, sensor EC1
A10 Indication range is exceeded, sensor EC2
A13 Indication range is exceeded, sensor O
2
A16 Indication range is exceeded, sensor CT
A19 ALARM 1 is exceeded, sensor EC1
A22 ALARM 1 is exceeded, sensor EC2