Erin Fingerscreener 206T, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 147

Description
Rev: 0-3 (international, serial no. 3010) - 2-4 - May 2006
- Dimension of belt on Fine Stacker: plain 1524 m (60”), 3 plies, 4.7 mm – 1.6 mm
- (3/16” – 1/16”) speed up to 2.12 m/s (418 FPM)
-
- Fine Stacker stockpiling height: from 3.81 to 4.95 m (12’-6” to 16’-3”)
- Machine capacity: up to 500 t/h achievable depending on materials,
finger apertures and conditions.
fines (up to 320 t/h)
overs (up to 200 t/h)
- Density of material: the Fingerscreener FS206T is designed to screen
materials up to 1,600 kg/m³ (100 lb/ft
3
)
- Material composition: the material to screen must be composed of about
40% of fines (minimum).
- Max. material size (regular):
600 mm x 600 mm x 600 mm (2’ x 2’ x 2’)
- Max. material size (heavy):
400 mm x 400 mm x 400 mm (16” x 16” x 16”)
rocks, stones, etc.
- Loading equipment: to achieve high screening capacity with high separation, the
Fingerscreener FS206T must be mechanically fed by an
excavator of 40 tons or less. Using bigger loading equipment
would damage the machine and void the warranty.
Note: Never feed more than 2 m³ (2.5 cu. yd) at a time. Furthermore, the material
should be dropped no higher than 0.6 m (24 inches) from the Screen Box
fingers.
Figure 2-2 Fingerscreener FS-206T