Quick Guide for Ericsson W35
This is a basic quick guide to help with the initial installation of the W35 for internet access. We
recommend customers also read the supplied manual before installing the W35.
Initial Setup:
Insert sim card: insert the sim card as shown in the picture on the side of the W35. You will need
to push the sim card in with your finger nail until it clicks into place.
Power – connect power to the W35
Cable – connect the network cable between your PC and a network port on the W35.
The W35 will take up to a minute to boot up, first the network strength indicator will appear
followed by the Internet indicator (round globe shape).
If the internet indicator does not come on you will need to follow the steps below:
Step 1)
Open a web browser such as Internet Explorer, enter http://192.168.1.1 in the address bar and
press enter. This will open up the Ericsson W35’s web interface. Password = user
Step 2)
Click on the ‘INTERNET’ tab
Step 3)
Untick the ‘Auto APN’ box and enter the APN supplied by your service provider. Click the apply
button below. A list of APN’s is supplied below.
Step 4)
If you wish to connect your computer to the W35 using WiFi, then go to the ‘Overview’
page and complete the ‘Wireless LAN Configuration Wizard’
INFORMATION ON APNS
AUSTRALIA
TELSTRA
telstra.internet – standard Telstra APN
telstra.datapack – used to access the data
plans (idle time out is 2 hours)
telstra.corp – used to access Telstra IP WAN \
IP Wireless shared access
telstra.bigpond – No longer supported with
W35, Bigpond now lock their modems
telstra.wll – used specifically for customers
using Telstra’s Wireless Local Loop service
THREE
3netaccess – standard Three APN
3services – used for prepaid plans
OPTUS
internet
VODAFONE
vfinternet.au
USA
AT&T
wap.cingular – default APN
isp.cingular – usually used for VPN
applications
T-MOBILE
internet2.voicestream.com
Edge Wireless
ISP
