Ericsson R290SAT Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 71

background image

46

R290 User’s Guide

Conference Calls

Call conferencing is a network subscription option that allows you to
merge an active and a held call to form a single multi-connection call
containing up to five remote parties. Once a conference call has been
established remote parties can be added, disconnected and extracted as
required. You can only control one conference call at a time.

NOTE:

This service is a subscription based option which also requires

subscription to the call hold service.

Only voice calls may be included in a conference call.

Another call can be made by putting the conference call on hold, by
entering the new number and press

YES

at any time.

To Create a Conference Call

To create a conference call you must first have one active call and one call
on hold. Once you have established this situation, from within the current
call.

1. Press

SOFT LEFT

and

5

to enter

the Conference Menu. The display

will show

‘1_Join’

.

2. Press

YES

to join the active and held calls into a single, active

conference call. If the join request is not successful, the message

‘Request Rejected’

will be shown.

The phone will return to the In-Call display, with the message.

You can repeat the procedure to add up to a total of five remote parties to
the conference call. Press

SOFT LEFT

and

5

to enter the Conference

Menu, press

1

to add new member.

Once a conference call has been established you can treat it as a normal
call. For example, if you need to make another call you can place the
conference call on hold (

SOFT LEFT, 2

) and make another call in the

normal way.

To Review the Participants in a Conference Call

• If the conference call is the only call enter the Normal In-Call Menu.

Press

SOFT LEFT

and

4

to display the Call List.

• If there is a conference call and a call on hold, press

SOFT LEFT

,

5

,

4

to display the Call List.

The display will show the first entry in the call list, for example:

The first line of the display shows the call number allocated to the remote
party, this will be in the range of 1 to 5. If available, the call identifier
(name) and telephone number will also be displayed. If these are
unavailable (which is only possible with incoming calls), a message
identifying the direction of the call will be displayed such as ‘

Incoming

’.

«
...
52
53
54
55
56
...
»

Содержание R290SAT








































































Отзывы:

Нет отзывов

Похожие инструкции для R290SAT

Бренд: Ultratec Страницы: 114

Бренд: Planet Страницы: 2

Бренд: HTC Страницы: 24

Бренд: Docomo Страницы: 469

Бренд: Clas Ohlson Страницы: 12

Бренд: Orinoquia Страницы: 26

Basic Digital Phone

Бренд: Inter-Tel Страницы: 90

Бренд: Mitel Страницы: 56

Бренд: Crestron Страницы: 422

Бренд: Samsung Страницы: 206

Бренд: Hisense Communications Страницы: 24

AQUOS ZETA SH-01G

Бренд: NTT docomo Страницы: 106

Vertis 2211 easy

Бренд: Overmax Страницы: 80

6185 - Cell Phone - CDMA

Бренд: Nokia Страницы: 105

6233 - Cell Phone 6 MB

Бренд: Nokia Страницы: 123

Xenium CTX300BLK

Бренд: Philips Страницы: 2

Xenium Dual Band

Бренд: Philips Страницы: 20

Xenium CTX130SLV/00

Бренд: Philips Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды