Ericsson R290SAT, Руководство пользователя

Страница: 40 / 71

32
R290 User’s Guide
1. Press SOFT LEFT , 1 , 1 to enter Call Setup menu.
2. Press
7
to show Auto Answer menu.
3. To enable Auto Answer, press
1
or
YES
. To disable it, press
2
.
A confirmation message will be displayed before the phone returns to the
Call Setup menu.
Greetings
A greetings text appears when you first turn on the phone. You can
change the text as follows:
1. Press
SOFT LEFT
,
1
,
3
to enter Greetings Menu.
2. Press CLR to clear message.
3. Press
YES
to confirm.
4. Enter the first letter of the greeting (up to four lines) by pressing the
appropriate numeric key as many times as required. To change the
character set to lower case press the
SOFT RIGHT key, see Table
“Lower Case Mode” on page 21.
NOTE:
Pressing the
SOFT RIGHT
key will cycle the character sets through
Upper case, Lower case, Numeric, Greek and back to Upper case. The
current mode is shown in the bottom right corner of the screen with the
characters ‘ABC’ corresponding to Upper Case, ‘abc’ for Lower Case,
etc.
For example, to enter the text: ‘World’, press the following keys: W (9),
SOFT RIGHT
, o (666), r (777), l (555), d (3). The display will show:
Press
YES
to confirm. A confirmation message ‘ Request Accepted ’ will
be displayed before the phone returns to the Call Setup menu.
Clock
The clock can be set for 12 or 24 hr mode and various date modes.
Set Time
1. Press
SOFT LEFT
,
1
,
4
to enter the Clock Menu.
2. Press
1
or
YES
to set clock, current time is shown in brackets.
3. Enter digits for new time and press
YES
. Use
*
key to toggle am/pm.
A confirmation message ‘ Clock updated ’ will be displayed before the
phone returns to the Clock menu.