Ericsson R290SAT Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 71

background image

28

R290 User’s Guide

If the maximum number of units has been reached (the Accumulative Call
Meter Maximum), you will only be able to make emergency calls. If you
are currently in an outgoing chargeable call, this will be shut down.

If the unit cost has not been set up, the total number of call units will still
be stored so that the unit cost may be added later in order to calculate the
costing information.

If the unit cost is replaced, the cost of all units will be re-calculated.

Call meters may be reset, but if a Phase 1 SIM is being used, they are
Phone PIN protected, or if a Phase 2 SIM is being used, they will be Super
PIN protected.

To Setup the Unit Time for Calls

1. Press

SOFT LEFT

, then

2

, to enter the Call Time Menu.

2. Press

4

to display the Cost Setup menu.

3. Press

2

to display the Unit Time screen.

4. Enter the unit time in minutes and seconds. Press

YES

to enter the

values that you have typed in. The time will be checked to determine
whether it is valid; if it is not, the display will show

‘Unit Time

Invalid’

, before reverting back to the Unit Time display.

5. Before the changes that you have made are accepted, you will be

required to enter the phone PIN.

NOTE:

If the phone PIN is entered incorrectly more than three times, the message

‘Call Rate Change Disabled

’ will be shown before returning to standby

and you will not be able to change the unit time until it has been entered
correctly.

To set the maximum cost

If you have set a maximum cost, when the total number of call units is
equal to this value, you will be prevented from making outgoing calls and
receiving chargeable incoming calls.

If you are in a call, 30 seconds before this limit is reached, you will be
warned that you have approximately 30 seconds of talk time left by the
RADIO PATH NOT AVAILABLE TONE being given and the message

‘Cost Limit Approaching

’ being displayed.

When the maximum cost limit is reached, the message

‘Cost Limit

Reached

’ will be displayed and the call terminated. The message

‘Cost

Limit Reached

’ or

‘Chargeable Incoming Call

’ will then be displayed

on the screen if another call is received.

«
...
34
35
36
37
38
...
»

Содержание R290SAT








































































Отзывы:

Нет отзывов

Похожие инструкции для R290SAT

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 17

Бренд: Panasonic Страницы: 2

Бренд: Parrot Страницы: 11

Бренд: TAG Heuer Страницы: 49

HTC Evo View 4G

Бренд: HTC Страницы: 42

Бренд: jablotron Страницы: 7

Бренд: Wiko Страницы: 98

ONE TOUCH 6033A

Бренд: Alcatel Страницы: 21

Бренд: Avaya Страницы: 84

Бренд: jablotron Страницы: 11

Бренд: SoftBank Страницы: 357

Бренд: BCM Страницы: 26

Бренд: PUREGEAR Страницы: 10

Бренд: Polycom Страницы: 3

Бренд: ASCOM Страницы: 2

Бренд: GENERAL MOBILE Страницы: 53

ZENFONE 3 SERIES

Бренд: Asus Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды